English French German Italian Portuguese Russian Spanish

CONTACT US : Tel: 1-815-788-8660/8661 Toll Free: 1-877-382-5278 (877-EV-BLAST) Fax: 1-815-788-8662  Email: Sales@everblast.com

 

ERGONOMIC NOZZLE EXTENSION - GETS NOZZLE CLOSER TO WORK SURFACE

 

Everblast's ergonomic blast cleaning nozzle extensions are designed to help make some types of sandblasting work more comfortable and help blast-techs reach difficult to get to areas. 

For example, blast cleaning steel floors of tanks while bending over can be uncomfortable work.  A Sandblasting technician’s work can be made more comfortable by using a nozzle extension. How?  Our Extension helps get nozzle closer to tank’s floor without the blast-tech having to work bent over.  

Another application where our nozzle extension is useful, is in line striping removal.  Using our extension with an Everblast blast nozzle, the blast tech does not need to work with his/her back in a bent position. Using Everblast’s ergonomic nozzle extensions, blasters now have an opportunity to work more comfortably and efficiently.   

An additional area where a nozzle extension could help a blast-tech, is in places where a blast nozzle cannot be held close enough to work surface.  Increased nozzle distance from work surface can result in an unwanted reduction in abrasive impact velocity.  Our extensions offer blast-techs, a tool to get nozzle and abrasive blast stream closer to work surface. This can improve blasting efficiency, reduce sandblasting time and lead to increased productivity.

Picture shows underside of a bridge where a nozzle extension might help with blast cleaning.

steelbridge 2b

We offer two extension versions, one for Contractor style nozzles with coarse threads and another for nozzles with 1-1/4" fine threads.   Also available is an adjustable handle that can be repositioned easily on extension.

Our 24” long aluminum nozzle extensions are made in USA and ship from, our location in Illinois.

 

  • Aluminum sandblasting nozzle extension. 
  • Available with choice of contractor or fine threads to fit most blast cleaning nozzles.
  • Extend reach by approximately 24" ( 609 mm)
  • Extension must fit flush, on a squared off hose end.
Results 1 - 2 of 2

Please contact us for more information:
Telephone: 815-788-8660/8661    Toll Free: 1-877-382-5278 (877-EV-BLAST)    Fax: 1-815-788-8662

Email us at: Sales@everblast.com

  Copyright © 2021 Tungsten carbide Blast Cleaning nozzles by Everblast.