SICWA-5/50HHD
Print This Product
Email to Friend
Silicon carbide wide entry nozzle. 5/16" bore Impact resistant liner assembly.
Description
Silicon carbide sandblasting nozzle, wide entry with contractor threads
Model:SICWA-5/50HHD uses gasket NW-50MM
| Nozzle Dimension | |||||
| Length inches/mm | Inlet inches/mm | Bore inches/mm | |||
| 5-3/4" | 146mm | 1-1/4" | 32mm | 5/16" | 8.00mm |
|
Guide on estimated nozzle service life in hours. |
|||
|
Nozzle Liner Material |
Steel shot/Grit / approx. Hours |
Expendable Abrasives /approx. Hours |
Aluminum Oxide/ approx Hours |
| Silicon Carbide | 600 -1000 | 400 - 600 | 50 -100 |
| All figures are indicative and given for liner material life comparison purposes only. Actual service life will depend on operational variable such as: blast pressure, media dimensions & media particle profile. All figures are approximate. Nozzle is considered worn when bore is approximately 1/16" larger than when new. |
|||
| Air and power requirements for a 5/16" bore nozzle at different nozzle pressures. All figures are approximate and given for guidance purposes only. | |||||||
| Bore 5/16"/8.0mm | PSI -50 | PSI-60 | PSI-70 | PSI-80 | PSI-90 | PSI-100 | PSI-125 |
| Air (CFM) | 80 | 90 | 100 | 115 | 126 | 140 | 190 |
| Abrasive/LBS/hr | 468 | 532 | 604 | 672 | 740 | 825 | 1000 |
| Horsepower | 17 | 20 | 25 | 27 | 28 | 30.5 | 37 |